ADD-A-VALVE ®
Emergency Shut Off
®
®
Device
Description
Emergency shut off device for copper tubing eliminates
shutdowns. Allows replacement of defective valve or
installation of new valve on hot or cold water in 30
minutes or less without shutting off water.
Model
ADD-A-VALVE ® is available in six models (See
table below).
Specifications
Valve may be replaced or installed on hot (220°F/104°C)
or cold water, H2O Glycol Systems, under pressure,
from 0 to 250 PSI/17 bar Max., on type M, L & K,
copper tube.
  • Eliminates facility shutdowns
  • Available in six sizes ranging from 1/2” to 2”
  • Bottom cleanout cap serves as line tap
  • Model S-100-DUE Ball Valve included in package
  • Gore-Tex ® PTFE tape seal OR “Tighter-Than-Tite” TM
    • included
  • U.S. and Canadian patents
    • Note
    On Multi-story buildings - all pumps, main and circulator,
    must be shut down prior to installation.
    ADD-A-VALVE ®
    Operation
    Once installed, the ADD-A-VALVE ® is a permanent part
    of the copper tube installation. The bottom cleanout cap
    serves as line tap. Drill motor should not be used on the
    ADD-A-VALVE ® . Use of a drill motor will release Jomar
    from any liability.
    Attention
    Architect/Engineer approval
    Jomar® requires that the Add-A-Valve® installer view
    Job Name
    Date
    Jomar's® CD/video on the proper installation of the
    Model Specified
    Quantity
    Add-A-Valve device prior to attempting installation.
    Copies are available for viewing at the Add-A-Valve®
    Variations Specified
    Distributers or Jomar website (www.jomar.com). The
    Customer/Wholesaler
    Add-A-Valve® Installer will be solely responsible for any
    Contractor
    liability resulting from improper installation of any Add-
    Architect
    A-Valve® device. Jomar will not be responsible, nor
    will it exchange or provide a refund for any improperly
    installed Add-A-Valve® device.
    Note: Information subject to change without notice.
    Jomar International Ltd.
    © Copyright 2006 Printed in U.S.A.
    ®
    ®
    7243 Miller Drive
    ISO 9002/EN 29002
    Add-A-Valve
    Warren, MI 48092
    04/06
    Phone: 800-325-5690
    Fax: 800-628-4194
    www.jomar.com
    ADD-A-VALVE ®
    Emergency Shut Off
    ®
    ®
    Device
    Description
    Material Specification
    Emergency shut off device for copper tubing eliminates
    No.
    Part Name
    Materials
    Qty.
    shutdowns. Allows replacement of defective valve or
    1
    Stem
    316 Stainless Steel
    1
    installation of new valve on hot or cold water in 30
    2
    Stem Holder
    Forged Brass
    1
    minutes or less without shutting off water.
    3
    Top Body Half
    Forged Brass
    1
    4
    Washer
    Steel
    1
    5
    O-Ring Holder
    Brass
    2
    Dimensions in Inches
    6
    O-Ring
    Viton®
    2
    7
    Plug
    Viton®
    1
    Computer No. Size
    A
    B(open) B(closed)
    C
    D
    8
    Bolt
    304 Stainless Steel
    4
    800-103ADD
    1/2”
    1.97
    6.81
    5.13
    5.18
    1.63
    9
    Bottom Body Half
    Forged Brass
    1
    800-104ADD
    3/4”
    2.28
    8.31
    6.25
    6.37
    1.94
    10
    Nuts
    304 Stainless Steel
    4
    800-105ADD
    1”
    2.64
    10.19
    7.63
    7.50
    2.69
    11
    Washer
    Steel
    1
    800-106ADD 1-1/4” 3.27
    11.81
    8.81
    9.06
    2.75
    12
    Washer
    Steel
    1
    800-107ADD 1-1/2” 3.61
    13.75
    10.31
    6.87
    3.44
    13
    Cutter Screw
    304 Stainless Steel
    1
    800-108ADD
    2”
    4.44
    16.75
    12.31
    12.69
    4.06
    14
    Cutter
    316 Stainless Steel
    1
    15
    Seat Ring
    304 Stainless Steel
    1
    16
    Gasket
    Viton®
    1
    17
    Bottom Cap
    Brass
    1
    Pressure Rating
    250 PSI / 17 Bar Max.
    220°F
    �
    �
    �
    Warranty
    The Company, for a period of one year from the date of
    shipment, warrants each product or system of its own
    manufacture to the original purchaser to be free from
    �
    defects in material and workmanship under normal use,
    B
    �
    �
    service and maintenance.
    �
    �
    �
    ��
    �
    ��
    ��
    �
    ��
    ��
    ��
    ��
    ��
    A
    �
    Note: Information subject to change without notice.
    Jomar International Ltd.
    © Copyright 2006 Printed in U.S.A.
    ®
    ®
    7243 Miller Drive
    Add-A-Valve
    Warren, MI 48092
    04/06
    Phone: 800-325-5690
    Fax: 800-628-4194
    www.jomar.com